PPL Liner
Description and Specification PPL Liner The inner vessel of a hydrothermal autoclave made up of polypropiolactone (PPL) is known as PPL Liner. It is mainly used to replace Teflon liner in case of...
Maximum operating temperature: ≤240°C
Safe temperature: – 200°C
Working Pressure: ≤3MPa or 30 Bar
Heating and Cooling Rate: ≤5°C/min
Material: Shell made of high-quality nonmagnetic 316 stainless steel
The Teflon lined hydrothermal autoclave comprises high-quality stainless steel (SS-316) and Polytetrafluoroethylene (PTFE); some researchers may call it by Teflon lined hydrothermal reactor. We manufacture the reactor setup from 10ml to 2000ml capacity. Generally, it uses to synthesize chemicals, nanoparticles, catalysts, and crystals at high temperatures. The hydrothermal or solvothermal reaction is carried out at high pressure; hence it also is known by a high-pressure reactor. It is resistant to corrosion, acidic solution, and stable at high temperature.
Generally, there are two types of Teflon lined autoclave: the threaded type and the flange type. We provide reactor setup from 10ml to 500ml in threaded type arrangement, whereas the flange type arrangement in 1 liter, 1.5 liters, and 2-liter capacity. The threaded type reactor has equipped with one bigger cap and one smaller cap, which is at the top. This arrangement provides better protection against high-pressure reactions. In the case of a flanged type setup, there are two flanges to support the vessel chamber. Theses flanges are properly tightened by using 6 tower bolts.
In the Teflon lined hydrothermal autoclave, the maximum operating temperature is 220 0C while the safe temperature is 200 0C. The inner Teflon vessel may deform if the operating temperature goes beyond 220 0C. Hence it is advisable to heat or cool the reactor at the rate of 5 0C/minute during a reaction and do not goes beyond the safe limit. It is designed and produced to maintain maximum pressure till 3 Mpa (30 Bar). It is better to fill the solution up to 90% of total capacity and use gloves while operating. The vessel should be clean properly before every reaction to avoid impurities.
At Shilpa enterprises, we manufacture and supply the product mainly in the research and development organization, educational institutes, scientific laboratories, and energy department. We offer a better discounted price for the bulk order.
4 other products in the same category:
Description and Specification PPL Liner The inner vessel of a hydrothermal autoclave made up of polypropiolactone (PPL) is known as PPL Liner. It is mainly used to replace Teflon liner in case of...
PTFE Liner Description and Specifications The PTFE liner is an inner vessel of a hydrothermal autoclave reactor composed of the Polytetrafluoroethylene (PTFE). Since it is a chemically inert...
Details and Specification of Hydrothermal Synthesis Reactor The Hydrothermal Synthesis process involves crystallizing compounds using many ways. Nanotechnology is one of the most important aspects...
Description and Specification PPL Lined Hydrothermal Autoclave The PPL-lined hydrothermal autoclave is manufactured mainly by two components; (PPL inner vessel) and stainless steel (SS-316) outer...