Technical Specifications: Molecular weight: 58.693 g/mol Boiling point: N/A Density: 2.8 g/cc Electrical resistivity: 2.00 ohms/sq./mil (25µm) Appearance: Light grey smooth paste Electronegativity: 1.91paulings The heat of fusion: 17.47 kg/mol Heat of vaporization: N/A ...

Technical Specifications Molecular weight: 60.0843 g/mol Boiling point: 2230°C Density: 2.65 g/cm³ Electrical resistivity: 10^5 to 10^18 Ωm Appearance: Clear Electronegativity: 1.90 The heat of fusion: N/A The heat of vaporization: N/A Thermal conductivity: 1.3 W/mK at room...

Main Highlights Natural Semiconductor High Purity Uniform Thickness Customizability Doping Capability Send Enquiry

Main Features Double-Walled Construction Limited Contact Points Cryogenic Storage Capability Vacuum Sealing Versatile Designs Effective Thermal Insulation Gas Management Silver Coating <button class="btn btn-primary...

Technical Specifications Product Name: Platinum Conductive Paste Purity: &gt;99.99% Viscosity: 40-90 Pa.S Storage Temperature: 0~10 ℃ in the refrigerator % Solids: 75% Particle Size: 0.5 to 5 µm Resistivity: 0.4 ohm/cm Storage Temperature: 2-8 °C Particle Size:...

Technical Specifications Design: Plug Type Valve Size: 40 to 200 mm (1.1/2" to 8") End Connection: Flanged Characteristics: On-Off Seat: PTFE Soft Seat Actuator Type: Diaphragm, Cylinder or Electric Actuator Action: Direct / Reverse Acting. Diaphragm: Nitrile Spring ranges: 3...

Main Highlights: Excellent conductors of electricity Versatility makes SWCNT's metallic or semiconductors even Excellent for miniaturizing electronic components for nanotechnology development Efficient conductors of thermal energy Extremely strong yet flexible Excessively lightweight with a higher...

Technical Specifications The Product Code of Graphene Oxide Dispersion is M2450A1 It has a concentration of up to 4 mg/mL and A pH between 2.2 and 2.5. It has a flake size of around 2 - 4 μm The flake thickness is approximately ~1 nm. Single Layer Ratio is&gt;95% (at 0.5 mg/mL). It...

Main Highlights Size: 1 to 100 nm Shape: Spherical, Cubic, or Hexagonal Composition: Magnetite (Fe3O4) or Maghemite (γ-Fe2O3) Magnetic properties: Superparamagnetic Surface area: 100 to 1000 m2/gm Bulk density: 0.5 to 1.0 gm/cm3 Melting point: 2055 °C Stability: Stable in air...

Features Sintering Temperature – 100 ºC Particle Size - 5 microns Composition – Multiwalled Carbon Nanotubes Sintering Time – Half hour Shell Life - 6 months in an unopened container Smooth ...

Main Features Volume resistivity: Less than 1 × 10⁻⁴ Ω·cm Thermal conductivity: 401 W·m⁻¹·K⁻¹ Curing requirements: 150 °C for 30–60 minutes Viscosity: 18 ± 2 Pa·s Solid fraction: Above 80% Physical form: Brown-colored paste Usable storage period: 3 months Recommended...

Demo

Main Highlights Purity: &gt;99.9% Porosity: ≥40% Tensile Strength = 36 Mpa Density (Solid Ti): 4.51 g/cm3 Density (Foam): 0.4 – 2.5 g/cm3 Melting Point: 1668 °C Thermal Conductivity: 16-22 W/m.K Elastic Modulus (Solid Ti): 105 Gpa Surface: Metallic Grey, Porous...

Main Highlights Chemical Composition: 100% pure nickel Form: Solid at room temperature Physical Appearance: Silvery-white metal with a subtle golden tint Mechanical Properties: Ductile and malleable also can be rolled into very thin sheets without cracking Thermal Performance: Maintains strength at high temperatures Melting Point:...

Main Highlights Material: Pure Lithium (≥ 99.9%) Appearance: Silvery-white, metallic, soft Thickness Range:0.02 mm to 2 mm (customizable) Width Range: 20 mm to 300 mm Density :~0.534 g/cm³ Melting Point:180.5 °C (356.9 °F) Boiling Point:1342 °C (2448 °F) Electrical Conductivity: ~1.08...

High-Quality Multi Walled Carbon Nanotubes (MWCNTs) Dispersion for Advanced Applications Technical Specifications Each nanotube wall contains 4 to 8 concentric layers of graphene. It appears as an opaque black liquid when dispersed. The concentration ranges from 0.5 to 2.0 wt% MWCNT in either water or an organic...

Technical Specifications of Graphene Dispersion Trade Names: Graphene dispersion or Single-layer graphene Chemical Formula: CxHy Category: 2D semiconductors, Carbon-based nanomaterials, Organic electronic materials Concentration: 10 mg/mL Base Solvent: Water Dimensions: 2 – 12 μm (size) ...

Features Composition: Silicon - Oxygen Melting Point: 1710 °C Boiling Point: 2950 °C Density: Variable (2.2-2.65 g/cm³) Purity: High (Above 99%) Synthesis Process: Controlled methods Structure: Crystal lattice Average Particle Size: 20-50 nm SSA: ~220 m2/g ...

Features Size: Nanoscale Zinc: 80.34 Oxygen: 19.6 Melting point: 1975 °C or 3587 °F Boiling point: 2360 °C or 4280 °F Density: 5600 kg/m3 or 0.202 lb./in3 Molar Mass: 81.40 g/mol Form: Powder Colour: White pH value: 8.9 Surface treating...

Technical Specifications Chemical formula: CuO Appearance: Black to brown powder Average particle size: 1-30 nm Specific surface area: 100-200 m2/g Melting point: 1201°C (2194 °F) Boiling point: 2000 °C (3632 °F) Density: 6.31 g/cm3 Electrical conductivity: 1.0-2.08 eV ...

Technical Specifications Chemical Formula: TiO2 Particle Size: &lt;100 nm Density: 4.26 g/cm3 Color: White Opacity: High Crystal Structure: Rutile or Anatase Bandgap: 3.0 eV Photostability: Good Toxicity: Low

Technical Specifications Concentration: 20 wt. % in isopropanol Particle Size: &lt; 50 nm (DLS) pH Level: 8 - 10 Density: 0.79 g/cm3 at 25 °C Mechanical Strength: 300 - 630 MPa Compressive Strength: 2,000 - 4,000 MPa Hardness: 15 - 19 GPa Moderate Thermal Conductivity: 20 -...

Features Magnesium : 60.29 Oxygen : 39.67 Melting Point : 2852 °C/5166 °F Boiling Point : 3600 °C (6512 °F) Density : 3.58 g/cm3 0.129 lb/in3 Molar Mass : 40.30 g/mol Chemical...

Specifications Material : Nickel alloy (high-quality) Thermal Conductivity : 100-400 W/mK (depending on porosity) Electrical Conductivity : 106 - 107 S/m Density : 0.2-0.8 g/cm3 (depending on porosity) Porosity : 70-98% ...

Technical Specifications Purity: &gt; 99% Form: Sheet Cell Size (PPI): 10 to 110 PPI Thickness: 0.5 to 50 mm Size &amp; Shape: Customised Porosity: 95%-98% Thermal Conductivity (Theoretical): 400W/m.K Mechanical Strength (Theoretical): ≥ 2.5MPa Tensile Strength...

Main Highlights Dimension: 100x100mm Thickness: 10mm Material: Aluminum 98.5% (Aluminum 6101 alloy) or Pure aluminum 99.5% Density range: 0.11 to 0.41 g/cm³ Porosity: 60-90% Pore size: 2-11 mm (Closed Cell) Compressive Strength: Up to 44 MPa Maximum service temperature:...

Features Excellent Build Quality Reactor volumes range from 50 mL to 500 liters. Maximum pressure: 350 bar Temperatures can reach 500 °C. SS-316, Hastelloy, Monel, Nickel, Inconel, Titanium, and Zirconium are the materials used. Magnetic drive coupling with high torque and low leakage is used for...

Features Quartz Fiber Diameter 3-5um Silica Content si02≧99.97% Heat conductivity coefficient - 0.01 ——0.029kilocalorie\M c End-use temperature ：Under 1700 ℃ The moisture content: ≤0.4% ignition loss ≤0.1% Strength of raw silk fracture &gt;0.05N/TEX Natural capacity degrees 5-6KG\cubic ...

Features Density : 1 to 8 grams per cm3 Tensile Strength : 28MPa Specific Surface Area : 2450 m2/G Electrical Conductivity : 3650 S/cm Carbon Content : approximately 98%

Features: Material of immersion well – Quartz Material of outer jacket – Glass / Borosilicate Maximum Operating Temperature – 600-degree Celsius Compatible with mercury lamp as well as a xenon lamp Suitable to use as a sustainable energy source <a class="btn btn-primary"...

Features Length – 5-10 nm Diameter – 5 , 10 , 15 microns Surface area – 750 m2/g &amp; 180 m2/g Stiffness of about 340 ± 50 N m-1. Strength of 42 N m-1 or 130 GPa Magnetic property above 10 Teslas Stress tolerance t 4.0 ±0 <iframe width="650" height="330"...

Features Give daylight effect by producing high luminous flux. It consumes lesser power in automobile applications. It has remarkable Stability in the arc of the lamp. It has a highly durable arc lamp. Comparatively produces less heat.

Features Sintering Temperature – 100 ºC Particle Size - ~ 5 microns Composition – Graphene, Adhesive, and solvent Sintering Time – Half hour Shell Life - 6 months Solid Loading - 60%" <iframe width="650"...

Features Temperature : 100 to 250 degrees Celsius Standard Volume : 150ml, 250ml, 500ml, 100ml, and 2000ml Send Enquiry

Features Surface Resistivity – &lt; 1 Ohms/Sq. Coating Thickness – 500 nm Substrate Thickness – 0.8 mm, 2.0 mm Transmittance – Null Coating – One-sided Customization – Available

Features Engineered of High Quality Stainless Steel Durable Noble Metal Catalyst material suitable for petrol or gasoline fuel. The operating temperature range of the product is 25 ˚C to 800 ˚C Supports an engine capacity of 150cc, 300cc, and 1400cc Cell Density 400 cpsi Efficiently Converts...

Features Supported Watts : 75 watts, 150 watts, 350 watts, and 500 watts LED Display Power Indicator Heavy Metal Body Inbuilt Cooling Fan Easy to Connect Engineered for Long Lasting Life Space Saving Design Smart Overload Protection 220 VAC input ...

Features Safe Temperature: - 200°C Max Working Temperature - 220°C Working Pressure: ≤ 3MPa Heating and Cooling Rate: ≤5°C/min MOC- PTFE

Features Safe Temperature: - 260°C Max Working Temperature - 280°C Working Pressure: ≤ 3MPa Heating and Cooling Rate: ≤5°C/min

Features Maximum operating temperature: ≤ 280°C Safe temperature: – 260°C Working Pressure: ≤3MPa or 30 Bar Heating and Cooling Rate: ≤5°C/min Material: Shell made of high-quality nonmagnetic 316 stainless steel

Features Product Name: Graphene Nanoplatelets Diameter - 10nm Height - 50 Microns Purity - 99.2% Surface Area - 65 m2/g Form Factor - Powder Colour - Black

Main Features Product Name : Aluminium Multi Foil Gas Sampling Bag MOC : Aluminium Foil, Polyethylene, Nylon Bag Capacity : 500ml, 1 Liter, 2 Liters, 3 Liters, 5 Liters, 10 Liters Valve MOC : Polypropylene (PP) Valve Type : Combo Valve with Septum at the Top Number of Layers : 4 Layers Bag...

Main Features Product Name: Kynar bag HS Code - Bag MOC - PVDF Valve MOC - Silicon, Polypropylene (PP) Form Factor - Solid Colour - Transparent Storage - Room Temperature Thickness - 3mil Capacity - 0.5, 1, 2, 3, 5, and 10 liters

Main Features The High Pressure 250W and 450W Lamps covers the Visible range from 350nm and above with peaks at 356nm, 365nm and into 420 range. Medium Pressure 250W and 450 W cover the UV range from 250nm to 400nm with peaks at 254nm, 356 and 365nm. 250W Power supply is required so that the light comes on as it requires...

Main Features Thickness: 2-3nm Product Purity: &gt;97% Number of layers: Average no. of layers 3-6 Bulk Density: 0.241g/cc Surface Area BET: 210- 300 m2/g Form: Powder Form Colour: Black

Main Features Thickness: 3-6 nm Product Purity: &gt;99% Number of layers: Average no. of layers 3-6 Surface area: 160 m2/g Production Methodology: Modified Hummer`s Method process Form: Powder Form

Main Features Thickness: 0.8-1.6 nm Product Purity: &gt;97% Number of layers: Average no. of layers 2-4 Specific surface area: 210- 300 m2/g Production Methodology: Chemical Vapour Deposition Process Form: Powder Form Colour: Dark Grey

Main Features Bulk Density: 0.18g/cc Thickness: 2-3 nm Diameter: 5 Micron Carbon Purity: &gt; 99% Surface Area: 255 m2/g Number of Layers: Average no. of layers 2-3 <iframe width="650" height="330" src="https://www.youtube.com/embed/NN_ICV6l_1Q" title="YouTube video player"...

Main Highlights Purity : &gt;98% Number Of Layers : 10-15 Diameter : 10-15 Micron Thickness : 10-15 nm Tensile strength: ~130 GPa Electrical conductivity: ~10 × 10⁷ S/m Thermal conductivity: ~5000 W/m·K Oxygen content: &lt;2% Bulk density: ~0.30 g/cc Appearance:...

Main Features Twist and Lock System. Flexible, Strong, Rigid, and placid. Made by High Quality Thick Aluminum Foil. Durable for air transport. Good stability of gases. Easy to carry and transport. Temperature of tolerance -72° to 107°C. Color: Silver MOC: Aluminum,...